GalxC~Cool~Flo® ME
GalxC~COOL-FLO ME is one of the Cool-Flo range of heat transfer fluids. GalxC~COOL-FLO ME is designed for use in industrial systems. GalxC~COOL-FLO ME has a barely perceptible odour. GalxC~COOL-FLO ME contains multi-metal corrosion inhibitors, anti-scale and dispersion polymers. It can be boosted with a broad spectrum microbiocide where necessary to effectively protect chilled water systems against corrosion, scale and microbiological fouling, thus allowing maximum heat transfer efficiency. GalxC~COOL-FLO ME is based on ethylene glycol and has excellent frost protection characteristics.
Please refer to our technical information data for further information
Recommended Applications
GalxC~COOL-FLO ME the product is suitable for use in a wide variety of heating, ventilation and air conditioning (HVAC) systems.
GalxC~COOL-FLO ME is usually diluted in chilled systems with demineralised, softened or good quality potable water depending on the system metallurgy and operating conditions.
|
Typical Properties Appearance: Red or Clear liquid |
Availability GalxC~COOL-FLO ME is packed in 20ltr & |
Why GalxC~Cool~Flo ME?
GalxC~Hydro~Flo ME heat transfer fluid is a formulation of 94.0 percent Ethylene glycol and a specially designed package of industrial corrosion & scale inhibitors. The fluid is dyed bright red to aid in leak detection. Solutions in water provide freeze protection to below -50ºC and burst protection to below -73ºC
- Custom blends readily available.
- Frost Protection
- Corrosion Inhibition
- Scale inhibition
- Microbiological protection can be added
- Dispersant to mobilise solids – helps avoid blockage of small bore pipework.
- Convenience of 20ltr; in stock and ready to delivered 24/7
- Available Nationwide
- Supported by laboratory analysis and reports regarding system conditions
System Protection and Heat Transfer Efficiency
Maintaining clean heat transfer systems allows for a high operating efficiency. Scale and rust build up acts as a powerful insulator against the transfer of heat, drastically reducing system efficiency. The corrosion & scale inhibitors in the product give reliable and lasting protection against corrosion and scaling to all metals common in heat transfer systems. These parameters can be boosted further according to site-specific water tests and operating conditions by extra additions from our Cool~Flo range.
